Use a PlungerĪ plunger can also be used to get dents out of stainless steel refrigerators. You may need to repeat the process if the dent doesn’t completely disappear. Once the dent is gone, let the area cool down before wiping it down with a soft cloth. You may need to repeat the process several times to get the desired effect. The vibration from the mallet should help to loosen the dent. Place the rubber mallet over the dent and gently tap it with your hand. Then, use a soft cloth to wipe down the area around the dent. Here’s how to do it: Preparing the Refrigeratorīefore you start, make sure to unplug the refrigerator so that you don’t risk an electrical shock. Use a Rubber MalletĪ rubber mallet can also be used to get dents out of stainless steel refrigerators. Once the dent is gone, turn off the vacuum cleaner and let the area cool down before wiping it down with a soft cloth. The suction from the vacuum cleaner should help to pull the dent out. Turn on the vacuum cleaner and place the upholstery tool over the dent. Using the Vacuum CleanerĪttach the upholstery tool to the end of the vacuum cleaner hose. Use a Vacuum CleanerĪ vacuum cleaner can also be used to get dents out of stainless steel refrigerators. Once the dent is gone, turn off the can of compressed air and let the area cool down before wiping it down with a soft cloth. The pressure from the compressed air should help to push the dent out. Shake the can of compressed air and then spray it directly onto the dent. Use a Can of Compressed AirĪ can of compressed air can also be used to get dents out of stainless steel refrigerators. Once the dent is gone, turn off the stove and let the area cool down before wiping it down with a soft cloth. This will help to soften the metal and cause it to expand, thus pushing the dent out. Let the hot water sit on the dent for several minutes. Once it’s boiling, carefully pour the hot water over the dent. Place it on the stove and bring the water to a boil. Boiling the Waterįill a pot or kettle with enough water to cover the dent. The steam from the boiling water helps to soften the metal and expand it, thus pushing the dent out. Use Boiling Waterīoiling water is another way to get dents out of stainless steel refrigerators. Once the dent is gone, turn off the hair dryer and let the area cool down before wiping it down with a soft cloth. It could take up to 10 minutes for this to happen, so be patient. Keep moving it around the area until the dent starts to come out. Next, switch on the hair dryer and hold it approximately six inches away from the dent. This will help to ensure that the heat from the hair dryer is evenly distributed across the surface. The heat from a hair dryer can help to soften the metal and cause it to expand, thus pushing the dent out. Here we’ll explore several ways to get dents out of stainless steel refrigerators. Whether you’re dealing with an old fridge or one that was recently damaged, the good news is that it’s possible to get those dents out without having to replace the whole appliance. Having dents in your stainless steel refrigerator can be an eyesore.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |